Ultimate Mallard Duck Mod!
Add this little bugger (a.k.a. Anas Platyrhynchos) to almost any location on your playfield using the cleverly designed Plastic Pasture Platform™, it's included! Instantly, your ordinary pinball machine becomes an extraordinary pinball machine; going from no ducks (probably, anyway) to one duck, just-like-that! Mind. Blown.
Take a picture of this Mallard Duck Mod installed in your machine, email it to us ([email protected]) and we will post your picture here!
Installation instructions:
1. Remove protective film from both sides of the Plastic Pasture Platform™.
2. Install the Plastic Pasture Platform™ to the playfield by loosening any screw on the playfield that is near to where you want the Ultimate Mallard Duck to reside.
3. Slide the open, slotted end of the Plastic Pasture Platform™ underneath the loosened screw and then tighten said screw back down.
4. Remove the protective film from the two-sided foam tape located under the Ultimate Mallard Duck.
5. Stick the Ultimate Mallard Duck to the Plastic Pasture Platform™.
6. Congratulate yourself on a job well done.
7. Don't gaze at your Ultimate Mallard Duck Mod for too long, it's not really a very good use of your time.