Reinforced left flipper assembly base plate for most Stern pinball machines.
This base plate's coil stop mounting holes have been reinforced with PEM studs to increase the number of threads holding on the coil stop.
The PEM-studded coil stop mounting holes are pre-threaded.
This flipper base requires the following hardware to mount the coil stop (sold separately via the related products links at the bottom of this page):
The PEM-studded coil stop mounting holes are pre-threaded.
This flipper base requires the following hardware to mount the coil stop (sold separately via the related products links at the bottom of this page):
(2) #10-32 x 3/8" black socket head bolts (#4010-01066-06)
(2) #10 split lock washers (#4701-00004-00).
All the other holes on this flipper base require thread forming screws.
This flipper base requires the following thread forming screws (sold separately via the related products links at the bottom of this page):
This flipper base requires the following thread forming screws (sold separately via the related products links at the bottom of this page):
(2) #8-32 x 38" serrated slotted hex head thread forming screws (#237-5975-00)
(2) #6-32 x 5/8" serrated slotted hex head thread forming screws (#237-5976-04)
(3) #6-32 x 3/8" serrated slotted hex head thread forming screws (#237-5976-02)
(2) #6-32 x 5/8" serrated slotted hex head thread forming screws (#237-5976-04)
(3) #6-32 x 3/8" serrated slotted hex head thread forming screws (#237-5976-02)
